WALNUT LUMBER - S4SSize: 3/4" x 7-1/4" WALNUT 1X8 S4S
WALNUT LUMBER – STEAMED – 1X8 S4S – FAS1F
3/4" x 7-1/4" Surfaced 4 Sides – Dimensional Lumber
S4S stands for “surfaced on 4 sides”. Our S4S is produced in a moulder with all surface faces and edges very smooth.
Cabinet Facing (aka Face Frame) is typically surfaced S4S to 13/16" from 4/4 lumber to actual width.
Dimensional lumber is commonly S4S and labeled according to nominal size, or the size of the rough board before it was planed smooth. For example, 1x6 is actually 3/4x5-1/2. Dimensional hardwood lumber or S4S lumber is ready to be made into cabinets, furniture or trim.
Walnut sapwood is very creamy white in color, while the heartwood, which ranges in color from light to a rich, dark brown, and matures to an almost purplish-black hue. Walnut often carries characteristically dark brown or purplish streaks. Walnut has a course, yet uniform texture, and while usually straight-grained, it is sometimes wavy or curly. This species produces a large variety of figure types.
Walnut is a tough wood with medium density, bending and crushing properties, with low stiffness and moderate shock resistance. Walnut machines well and can be worked relatively easily with either hand or machine tools. A moderate blunting effect is to be expected on cutting edges. It has good steam-bending properties, holds nails and screws well, and can be glued satisfactorily. Walnut can be stained or polished to an exceptional finish and develops a rich patina that gains luster as it ages. Medium to dark stains are most popular for finishing Walnut.
Region: Appalachian United States
- Walnut Lumber
FAS1F – S4S
Face Frame – Cabinet Facing
- 3/4" x 7-1/4" – 1X8 S4S Walnut Lumber
- Random lengths
- Region: Appalachian United States
- Good steam-bending properties
- Machines easily, glues, nails and stains well.
- Used for cabinet facing, face frame material, furniture, trim
- Illustrated Grading Guide
- Helpful Guide to Understanding Lumber Terms
S4S LUMBER DISCLAIMER
STOP — This item requires more information.
You need to provide us with the following information for your S4S order.
Note: S4S is sold by the linear foot.
Please note – lengths over 10 feet are more expensive to ship.
If you need specific lengths or other requirements, use the comment section in your shopping cart to provide this information.
- number of pieces
- specific lengths if required
Example: If you order 100 linear feet of 1x6 and need one board 12' in length, be sure to enter that information in the comment section. We will do our best to fill your order as requested. If we need to mill to get the length, it may cause a delay in shipment.