Loading... Please Wait

SKU# 1316RWOSLR

RIFT WHITE OAK LUMBER - S2S SLR1E (S3S)

WHITE OAK RIFT 13/16"

WHITE OAK LUMBER – RIFT SAWN – SELECT & BETTER – S3S
13/16" Surfaced 2 Sides & Straight Line Ripped 1 Edge Random Widths – Random Lengths

S3S – The board has been surfaced S2S first, then one edge is ripped straight (also known as SLR1E or straight line ripped one edge).

The sapwood of White Oak is light in color and can range from a pale yellow-brown to a greyish-white. The heartwood may be either light brown in color or a darker brown with deep, golden tones. The distinctive coarse texture and straight grain has longer rays than Red Oak. Fast-growing Oaks, such as those grown in the South, produce wider, more prominent growth rings.

White Oak is heavy, hard, and very strong. It is worked easily, by machine or by hand, although slow-growing Oak is much easier to work than the faster growing varieties. While White Oak nails and screws well, pre-boring is advised for best results. To prevent the wood from reacting to iron, galvanized nails are recommended. Excellent results can be expected with staining, bleaching, or pickling.

Region: Eastern United States and Appalachian area.

  • 13/16" S2S SLR1E White Oak Lumber – Rift Sawn
  • Select & Better
  • Random widths/lengths
  • Region: Eastern United States and Appalachian area
  • Hard, heavy, and very strong.
  • Machines easily, glues, nails and stains well.
  • Used for furniture, cabinets, flooring, stair parts, pulpits, pews, barrels and casks.
  • Illustrated Grading Guide

LUMBER DISCLAIMER – S2S SLR1E

STOP — This item requires more information. You need to provide us with the following information for your lumber order.

Note: Quantity ordered refers to Board Feet.

S2S boards come in random widths and lengths.
These S2S SLR1E boards are calculated as gross before milling.
Typically, you will receive approximately 10% less board footage than you order due to the waste factor from milling.

***Be sure to order enough board footage of material to cover your needs.

Please note – lengths over 10 feet are more expensive to ship.
The following board foot calculator can be used to help you calculate your order.

Board Foot Calculator

The easiest and most common way to calculate board feet is to use a board foot calculator.
Several different board foot calculators are available online or check your app store and download to your phone.

To calculate board feet of lumber, use the following formula:

    Board Feet = Width (inches) x Thickness (inches) x Length (FEET) divided by 12.
    Example – For a piece of lumber 2 inches thick, 6 inches wide and 10 feet long, you calculate board feet as follows:
    Board Feet = (6 x 2 x 10) divide by 12 = 10 board feet.

If your order requires specifics, call to verify we have exactly what you need.
Example: If you order 100 board feet and need one board 8'6" that is at least 8" wide and one board 10' at least 6" wide – be sure to state exactly what you need.

Use the comment section in your shopping cart to provide this information.

  • number of pieces needed.
  • specific widths, if required.
  • specific lengths, if required.