Loading... Please Wait

SKU# 1316POPSLR

POPLAR LUMBER - S2S SLR1E (S3S)

POPLAR 13/16" SLR

POPLAR LUMBER – FAS – S3S
13/16" Surfaced 2 Sides & Straight Line Ripped 1 Edge Random Widths – Random Lengths

S3S – The board has been surfaced S2S first, then one edge is ripped straight (also known as SLR1E or straight line ripped one edge).

Poplar sapwood ranges in color from creamy white to greyish-white to white with a yellowish cast and is sometimes striped. The heartwood, which is usually tan, also presents a variety of tones, sometimes with a slightly greenish cast, and occasionally with dark purplish streaks. Poplar offers a uniform, fine texture and is light to medium in weight with a straight grain.

Yellow Poplar is exceptionally easy to work with both hand and machine tools, although its woolly texture can blunt tools slightly. It planes and turns beautifully and has satisfactory nailing properties with good screwing and gluing properties. It is a medium-density wood with low shock resistance and stiffness. It does not shape or sand well, but holds paint, enamel, and stain well. On occasion, stain will produce patchy results.

Region: Eastern United States.

  • 13/16" S2S SLR1E Poplar Lumber
  • FAS
  • Random widths/lengths
  • Region: Eastern United States.
  • Utility wood - Seldom used for its appearance
  • Low density can sometimes leave fuzzy surfaces and edges.
  • Used for furniture framing, drawers, mouldings, millwork, boxes, pallets and crating.
  • Illustrated Grading Guide

LUMBER DISCLAIMER – S2S SLR1E

STOP — This item requires more information. You need to provide us with the following information for your lumber order.

Note: Quantity ordered refers to Board Feet.

S2S boards come in random widths and lengths.
These S2S SLR1E boards are calculated as gross before milling.
Typically, you will receive approximately 10% less board footage than you order due to the waste factor from milling.

***Be sure to order enough board footage of material to cover your needs.

Please note – lengths over 10 feet are more expensive to ship.
The following board foot calculator can be used to help you calculate your order.

Board Foot Calculator

The easiest and most common way to calculate board feet is to use a board foot calculator.
Several different board foot calculators are available online or check your app store and download to your phone.

To calculate board feet of lumber, use the following formula:

    Board Feet = Width (inches) x Thickness (inches) x Length (FEET) divided by 12.
    Example – For a piece of lumber 2 inches thick, 6 inches wide and 10 feet long, you calculate board feet as follows:
    Board Feet = (6 x 2 x 10) divide by 12 = 10 board feet.

If your order requires specifics, call to verify we have exactly what you need.
Example: If you order 100 board feet and need one board 8'6" that is at least 8" wide and one board 10' at least 6" wide – be sure to state exactly what you need.

Use the comment section in your shopping cart to provide this information.

  • number of pieces needed.
  • specific widths, if required.
  • specific lengths, if required.