Loading... Please Wait

SKU# KV8071-14

BLACK POCKET DOOR SLIDE KIT

Size: 14" Manufacturer Part #: KV8071-14 POCKET DOOR SLIDE KIT - BLACK 14"

KV 8071 Series Pocket Door Slides
Pivot Door Slides – Ebony Black

A 30 lb. class 3/4 extension pivot door slide designed for entertainment centers and storage cabinetry. Recommended for vertical doors with a maximum 42" high x 24" wide.
Horizontal pivot doors maximum 24" high x 48" wide.

  • Ideal for use in entertainment and home theater cabinets.
  • 30 pound class rated for medium-duty applications.
  • Maximum vertical door dimensions: 42" (h) x 24" (w).
  • Maximum horizontal pivot door dimensions: 24" (h) x 48" (w).
  • Follower strip bracket was designed to allow the follower strip to be installed after the slides.
  • Self-closing, three-way adjustable isometric door hinge.
  • 8071 allows installer to use the hinge/hinge base of their choice.
  • Precision steel ball bearings provide smooth and quiet operation.
  • 8071 series door slide is designed to meet or exceed ANSI performance standards as established by BIFMA, BHMA and KCMA.
  • Backed by the exclusive Knape & Vogt Limited Lifetime Warranty.
  • Hinges and plate kits are sold separately.

When ordering this pocket door slide it includes the pair of slides and the mounting hardware. It does not include the hinge or hinge plates.

If you need an INSET application and have a 3/4" door thickness – you will need to add TWO of the C2RBG66-TTM hinge and TWO of the BAP3R29 hinge plate to your order. The hinges will include the screws. These hinges require a 35mm cup hole.

If you need a PARTIAL OVERLAY and have a 3/4" door thickness – you will need to add the HKL hinge kit to your order. The Hinge Kits will have 2 hinges and 2 plates with screws. BE AWARE – The HKL hinge will require a 40mm cup hole.

If you need an INSET application and have an 1-1/4" DOOR THICKNESS – you will need to add the HKX hinge kit to your order. The Hinge Kits will have 2 hinges and 2 plates with screws. BE AWARE – The HKX hinge kit will require a 40mm cup hole.