SKU# 112S4SPGMAPLE

MAPLE PAINT GRADE LUMBER - S4S

Size: 13/16" x 1-1/2" MAPLE PAINT GRADE 1 1/2" S4S

SOFT MAPLE LUMBER – 1-1/2" S4S – PAINT GRADE
13/16" x 1-1/2" Surfaced 4 Sides – Cabinet Facing
Random Lengths

S4S stands for “surfaced on 4 sides”. Our S4S is produced in a moulder with all surface faces and edges very smooth.

Cabinet Facing (aka Face Frame) is typically surfaced S4S to 13/16" from 4/4 lumber to actual width.

Dimensional lumber is commonly S4S and labeled according to nominal size, or the size of the rough board before it was planed smooth. For example, 1x6 is actually 3/4x5-1/2. Dimensional hardwood lumber or S4S lumber is ready to be made into cabinets, furniture or trim.

Paint Grade Maple is a combination of sapwood and heartwood. Paint Grade Maple is not white. The sapwood of Soft Maple varies in color from creamy white to greyish-white and is sometimes marked with darker colored pith flecks. Although not as rich as Hard Maple, the heartwood is similar in color, with reddish-brown tones ranging from light to dark. The growth rings of Soft Maple are not as distinct as those of Hard Maple. Soft maple is straight-grained, without the exceptional burled or birds-eye characteristics that can be found in Hard Maple.

Soft Maple is less hard and stiff than Hard Maple, and low in stiffness and shock resistance. It machines well, with minimum blunting to tools, and can be nailed or screwed satisfactorily. Soft Maple takes stain exceptionally well.

Region: Eastern United States and Pacific Northwest.

Soft Maple Lumber

Face Frame – Cabinet Facing

13/16" x 1-1/2" S4S PG Soft Maple Lumber
Paint Grade
Random lengths
Region: Eastern United States and Pacific Northwest
Less hard and stiff than Hard Maple
Machines easily, glues, nails and stains well.
Used for furniture, cabinets, turnings, plywood and veneers.
Used for cabinet facing, face frame material, furniture, trim.
Illustrated Grading Guide
Helpful Guide to Understanding Lumber Terms

S4S LUMBER DISCLAIMER

STOP — This item requires more information.
You need to provide us with the following information for your S4S order.
We will do our best to accommodate your order within the limits of our inventory.

Note: S4S is sold by the linear foot.
Please note – lengths over 10 feet are more expensive to ship.

If you need specific lengths or other requirements, use the comment section in your shopping cart to provide this information.

number of pieces
specific lengths if required

Example: If you order 100 linear feet of 1x6 and need one board 12' in length, be sure to enter that information in the comment section. We will do our best to fill your order as requested. If we need to mill to get the length, it may cause a delay in shipment.

Pack Quantity

The quantity that makes up a standard package.

You must order in units of this quantity.

Items are sold in Gross and Pieces.

Example: Package quantity

.3333 gross enter .3333
10 gross enter 10 or 20, 30 etc.
72 pieces enter 72 or 144, 216 etc.

Please note: 1 gross = 144 pieces.

Pack Quantity	Pieces
0.0208	3
0.0417	6
0.0555	8
0.0625	9
0.0694	10
0.0833	12
0.1041	15
0.1111	16
0.1250	18
0.1389	20
0.1667	24
0.2083	30
0.2222	32
0.2500	36
0.2778	40
0.3333	48
0.4166	60
0.5000	72
0.6667	96
0.7500	108
1.3333	192
1.5000	216
1.6667	240