Gallon Titebond Ii 5006, Adhesive

Weight: 9.5 PC

Titebond®II Premium Wood Glue

5006 - Gallon

Titebond II Premium Wood Glue is the only leading brand, one-part PVA wood glue that passes the ANSI/HPVA Type II water-resistance specification and offers superior bond strength, longer open assembly time and lower application temperature. It is ideal for exterior woodworking projects, including outdoor furniture, birdhouses, mailboxes, planters and picnic tables.

Titebond II Premium provides a strong initial tack, fast speed of set, superior strength and excellent sandability. It is FDA approved for indirect food contact (cutting boards) and is ideal for radio frequency (R-F) gluing systems. It is easy to use, non-toxic, solvent free and cleans up with water. Ideal for interior and exterior applications.

Physical Properties

  • Type: Cross-linking polyvinyl acetate
  • State: Liquid
  • Color: Honey cream
  • Dried Film: Translucent, yellow
  • Freeze/thaw stability: Stable
  • Viscosity: 4,000 cps
  • Storage life: 12 months in tightly closed containers at 75º F
  • Calculated VOC: 5.5 g/L
  • Weight/gallon: 9.1 lbs.
  • Chalk temperature: *Approximately 55ºF
  • Solids: 48%
  • Flashpoint: >200ºF
  • pH: 3.0
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials can be during application, to assure a good bond.

Application Guidelines

  • Application Temperature: Above 55°
  • Open assembly time: 5 minutes (70°F/50%RH)
  • Total assembly time: 10-15 minutes (70°F./50%RH)
  • Minimum required spread: Approximately 6 mils or 250 square feet per gallon
  • Required clamping pressure: Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
  • Method of Application: Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.
  • Cleanup: Damp cloth while glue is wet. Scrape off and sand dried excess.

Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING. KEEP OUT OF THE REACH OF CHILDREN.

Product Downloads:
Safety Data Sheet Titebond II Premium Wood Glue