COVE BIT - CARBIDE TIPPEDSize: 1-3/8" Manufacturer Part #: 49116 COVE - 1/2 RADIUS - 1-3/8 DIA-1/4 SHANK
CARBIDE TIPPED COVE
1/2" RADIUS x 1-3/8" DIA x 3/4" x 1/4" SHANK - with BALL BEARING GUIDE
The “covetto” form – produced by the cove bit – is one of the classic building blocks for many molding profiles. Use it alone or in combination with beads and fillets. Use the cove to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables, the other half is the corner-round.
For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish and prolong tool life. The largest diameter bits must be run at reduced speed.
Use in a handheld or table-mounted router.
- Diameter – 1-3/8
- Radius – 1/2
- Cutting Height – 3/4
- Shank – 1/4
- Overall Length – 2-1/4
- FLUTES – 2
- Replacement bearing #47704