Loading... Please Wait

SKU# 1316ACSLR

AROMATIC CEDAR LUMBER - S2S SLR1E (S3S)

AROMATIC CEDAR 13/16"

AROMATIC CEDAR LUMBER – #1 COMMON & BETTER – S3S
13/16" Surfaced 2 Sides & Straight Line Ripped 1 Edge Random Widths – Random Lengths

S3S – The board has been surfaced S2S first, then one edge is ripped straight (also known as SLR1E or straight line ripped one edge).

Although Aromatic Red Cedar is included in the cypress family, which includes many species of cedar, it’s more closely related in junipers. In tree form, it is more commonly called Eastern Red Cedar, while the wood itself is usually referred to as Aromatic Red Cedar. Most trees tend to be fairly small in diameter, therefore Aromatic Red Cedar boards tend to be knotty and narrow.

Heartwood tends to be reddish or violet-brown. Sapwood is a pale-yellow color and can appear throughout the heartwood as streaks and stripes.

Aromatic Red Cedar has excellent resistance to both decay and insect attack. Overall, is easy to work although it has a high silica content, which can dull cutters. The wood is typically left unfinished to preserve its aromatic properties.

Region: Eastern North America

  • 13/16" S2S SLR1E Aromatic Red Cedar Lumber
  • #1 Common & Better
  • Random widths/lengths
  • Region: Eastern North America
  • Glues and finishes well
  • Excellent resistance to both decay and insect attack.
  • Has a distinct and tell-tale scent.
  • Used in closets and chest linings, fence posts, outdoor furniture.
  • Illustrated Grading Guide

LUMBER DISCLAIMER – S2S SLR1E

STOP — This item requires more information. You need to provide us with the following information for your lumber order.

Note: Quantity ordered refers to Board Feet.

S2S boards come in random widths and lengths.
These S2S SLR1E boards are calculated as gross before milling.
Typically, you will receive approximately 10% less board footage than you order due to the waste factor from milling.

***Be sure to order enough board footage of material to cover your needs.

Please note – lengths over 10 feet are more expensive to ship.
The following board foot calculator can be used to help you calculate your order.

Board Foot Calculator

The easiest and most common way to calculate board feet is to use a board foot calculator.
Several different board foot calculators are available online or check your app store and download to your phone.

To calculate board feet of lumber, use the following formula:

    Board Feet = Width (inches) x Thickness (inches) x Length (FEET) divided by 12.
    Example – For a piece of lumber 2 inches thick, 6 inches wide and 10 feet long, you calculate board feet as follows:
    Board Feet = (6 x 2 x 10) divide by 12 = 10 board feet.

If your order requires specifics, call to verify we have exactly what you need.
Example: If you order 100 board feet and need one board 8'6" that is at least 8" wide and one board 10' at least 6" wide – be sure to state exactly what you need.

Use the comment section in your shopping cart to provide this information.

  • number of pieces needed.
  • specific widths, if required.
  • specific lengths, if required.