DADO SET - CARBIDE TIPPEDSize: 8" X 24TOOTH Manufacturer Part #: 658030 8" X 24T - DADO SET - 5/8 BORE
CARBIDE TIPPED DADO SET
8" X 24T WITH 5/8" BORE
Dadoes (cross-grain cuts) and grooves (cuts with the grain) are cut efficiently on the table saw with a dado stack set.
Unlike a wobbler, a stack set produces a flat-bottom cut with chip-free edges.
Amana Tool® makes dado stack sets for every machine and every type of woodworking material.
The standard width capacity ranges from 1/4" to 13/16".
Additional chippers may be purchased separately to expand the capacity beyond 13/16".
The standard set, regardless of diameter or tooth count, consists of two outside saw blades and four inside chippers.
The outside blades feature hollow-ground plates for proper clearance, and alternate top bevel (ATB) grind with every sixth tooth flat ground (FT).
For plywood and melamine, the sets with 46-tooth outside blades are recommended.
Teeth refers to the number of teeth for each outside saw blade.
- Diameter – 8" (200mm)
- Teeth – 24
- Bore – 5/8"
- Tooth Grind – ATB/FT
- Hook Angle – 5°
- Kerf – 1/4" - 13/16"
- Description – (5) 2-Wing Chippers