Main 1 - BRAD POINT BORING BIT - L/H - CARBIDE TIPPED -

Main 2 - BRAD POINT BORING BIT - L/H - CARBIDE TIPPED -

Main 3 - BRAD POINT BORING BIT - L/H - CARBIDE TIPPED -

Main 4 - BRAD POINT BORING BIT - L/H - CARBIDE TIPPED -

SKU# RB301005

BRAD POINT BORING BIT - L/H - CARBIDE TIPPED

Size: 5MM Manufacturer Part #: 301005 BRAD POINT BORING 5MM L/H - 10MM SHANK

CARBIDE TIPPED BRAD POINT BORING BIT L/H
5mm DIA x 57mm LONG x 10mm SHANK

Industrial Brad Point Boring Bits are coated with a non-stick coating for longer lasting cutting edge and tool life.

Amana Tool® dowel drills are coated with a special Polytetrafluoroethylene (PTFE), a non-stick color coating. In cases where the carbide tip cutting edges are coated, there is no need to sand the coating off before use. Once the tool starts drilling, the coating is cleared off the needed cutting edge right away.

Amana's coating is applied onto the bit at a temperature of 570°F. The coating reduces the friction between the chip and the body inside the flute and it helps to clear the chips out of the hole during the drilling creating a cooler drilling area, no burning and longer lasting cutting edge.

CARBIDE TIPPED BRAD POINT BORING BIT L/H

Brad Point Boring – Hinge Boring – Drill Bits

Router Bits and Accessories

Power Tool Accessories

Tools

Diameter – 5mm
Cutting Height – 27mm
Shank – 10mm
Overall Length – 57mm
Rotation – Left Hand

Pack Quantity

The quantity that makes up a standard package.

You must order in units of this quantity.

Items are sold in Gross and Pieces.

Example: Package quantity

.3333 gross enter .3333
10 gross enter 10 or 20, 30 etc.
72 pieces enter 72 or 144, 216 etc.

Please note: 1 gross = 144 pieces.

Pack Quantity	Pieces
0.0208	3
0.0417	6
0.0555	8
0.0625	9
0.0694	10
0.0833	12
0.1041	15
0.1111	16
0.1250	18
0.1389	20
0.1667	24
0.2083	30
0.2222	32
0.2500	36
0.2778	40
0.3333	48
0.4166	60
0.5000	72
0.6667	96
0.7500	108
1.3333	192
1.5000	216
1.6667	240

Loading... Please Wait

BRAD POINT BORING BIT - L/H - CARBIDE TIPPED